| Bolt Size | Thread Pitch [mm] | Mean Diam. of Thread [mm] | Load Area [mm2] | Thread Friction µT | OD of Contact Area [mm] | ID of Contact Area [mm] | Mean Ø Contact Area | Washer Friction µW | Yield Point of Bolt [Mpa] | Ratio of Yield Point | Tension 65% Rel [Mpa] | Clamp load [kN] | Torque Total [Nm] | Torque Total FT/LBS |
|---|
| M45 | 4.5 | 42.1 | 1306.06 | 0.11 | 70 | 46.2 | 58.10 | 0.12 | 640 | 75% | 480 | 627 | 4,311 | 3,177 |
| M48 | 5 | 44.8
| 1473.22
| 0.11 | 75 | 49.6 | 62.30 | 0.12 | 640 | 75% | 480 | 707 | 5,218 | 3,845 |
| M52 | 5 | 48.8 | 1757.9 | 0.11 | 80 | 53.6 | 66.80 | 0.12 | 640 | 75% | 480 | 844 | 6,668 | 4,914 |
| M56 | 5.5 | 52.4 | 2030.1 | 0.11 | 85 | 59.1 | 72.05 | 0.12 | 640 | 75% | 480 | 974 | 8,313 | 6,127 |
| M60 | 5.5 | 56.4 | 2362.1 | 0.11 | 90 | 63.1 | 76.55 | 0.12 | 640 | 75% | 480 | 1,134 | 10,267 | 7,567 |
| M64 | 6 | 60.1 | 2676.1 | 0.11 | 95 | 67.1 | 81.05 | 0.12 | 640 | 75% | 480 | 1,285 | 12,381 | 9,125 |
| M68 | 6 | 64.1 | 3055.4 | 0.11 | 100 | 71.1 | 85.55 | 0.12 | 640 | 75% | 480 | 1,467 | 14,905 | 10,985 |
| M72 | 6 | 68.1 | 3460 | 0.11 | 105 | 75.1 | 90.05 | 0.12 | 640 | 75% | 480 | 1,661 | 17,748 | 13,080 |
| M76 | 6 | 72.1 | 3889 | 0.11 | 110 | 79.1 | 94.55 | 0.12 | 640 | 75% | 480 | 1,867 | 20,931 | 15,426 |
| M80 | 6 | 76.1 | 4344 | 0.11 | 115 | 83.1 | 99.05 | 0.12 | 640 | 75% | 480 | 2,085 | 24,471 | 18,035 |
| M85 | 6 | 81.1 | 4948 | 0.11 | 120 | 88.1 | 104.05 | 0.12 | 640 | 75% | 480 | 2,375 | 29,340 | 21,623 |
| M90 | 6 | 86.1 | 5591 | 0.11 | 130 | 92.4 | 111.20 | 0.12 | 640 | 75% | 480 | 2,684 | 35,157 | 25,911 |
| M95 | 6 | 91.1 | 6273 | 0.11 | 135 | 97.4 | 116.20 | 0.12 | 640 | 75% | 480 | 3,011 | 41,308 | 30,444 |
| M100 | 6 | 96.1 | 6995 | 0.11 | 145 | 103.4 | 124.20 | 0.12 | 640 | 75% | 480 | 3,358 | 48,738 | 35,920 |
| M105 | 6 | 101.1 | 7756 | 0.11 | 150 | 108.4 | 129.20 | 0.12 | 640 | 75% | 480 | 3,723 | 56,340 | 41,523 |
| M110 | 6 | 106.1 | 8556 | 0.11 | 155 | 113.4 | 134.20 | 0.12 | 640 | 75% | 480 | 4,107 | 64,690 | 47,676 |
| M115 | 6 | 111.1 | 9395 | 0.11 | 165 | 118.4 | 141.70 | 0.12 | 640 | 75% | 480 | 4,510 | 74,499 | 54,906 |
| M120 | 6 | 116.1 | 10274 | 0.11 | 170 | 123.4 | 146.70 | 0.12 | 640 | 75% | 480 | 4,931 | 84,514 | 62,286 |
| M125 | 6 | 121.1 | 11192 | 0.11 | 173 | 128.4 | 150.70 | 0.12 | 640 | 75% | 480 | 5,372 | 95,061 | 70,060 |
| M130 | 6 | 126.1 | 12149 | 0.11 | 178 | 133.4 | 155.70 | 0.12 | 640 | 75% | 480 | 5,831 | 106,795 | 78,708 |
| Bolt Size | Thread Pitch [mm] | Mean Diam. of Thread [mm] | Thread Friction µT | OD of Contact Area [mm] | ID of Contact Area [mm] | Mean Ø Contact Area | Washer Friction µW | Yield Point of Bolt [Mpa] | Ratio of Yield Point | Tension 65% Rel [Mpa] | Clamp load [kN] | Torque Total [Nm] | Torque Total FT/LBS |
|---|
| M45 | 4.5 | 42.1 | 0.14 | 70 | 46.2 | 58.10 | 0.1 | 640 | 75% | 675 | 882 | 6,194 | 4,565 |
| M48 | 5 | 44.8
| 0.14 | 75 | 49.6 | 62.30 | 0.1 | 640 | 75% | 675 | 994 | 7,489 | 5,520 |
| M52 | 5 | 48.8 | 0.14 | 80 | 53.6 | 66.80 | 0.1 | 640 | 75% | 675 | 1,187 | 9,588 | 7,066 |
| M56 | 5.5 | 52.4 | 0.14 | 85 | 59.1 | 72.05 | 0.1 | 640 | 75% | 675 | 1,370 | 11,948 | 8,806 |
| M60 | 5.5 | 56.4 | 0.14 | 90 | 63.1 | 76.55 | 0.1 | 640 | 75% | 675 | 1,594 | 14,777 | 10,891 |
| M64 | 6 | 60.1 | 0.14 | 95 | 67.1 | 81.05 | 0.1 | 640 | 75% | 675 | 1,806 | 17,829 | 13,140 |
| M68 | 6 | 64.1 | 0.14 | 100 | 71.1 | 85.55 | 0.1 | 640 | 75% | 675 | 2,062 | 21,488 | 15,836 |
| M72 | 6 | 68.1 | 0.14
| 105 | 75.1 | 90.05 | 0.1 | 640 | 75% | 675 | 2,335 | 25,613 | 18,877 |
| M76 | 6 | 72.1 | 0.14 | 110 | 79.1 | 94.55 | 0.1 | 640 | 75% | 675 | 2,625 | 30,234 | 22,283 |
| M80 | 6 | 76.1 | 0.14
| 115 | 83.1 | 99.05 | 0.1 | 640 | 75% | 675 | 2,932 | 35,378 | 26,073 |
| M85 | 6 | 81.1 | 0.14
| 120 | 88.1 | 104.05 | 0.1 | 640 | 75% | 675 | 3,340 | 42,481 | 31,308 |
| M90 | 6 | 86.1 | 0.14 | 130 | 92.4 | 111.20 | 0.1 | 640 | 75% | 675 | 3,774 | 50,878 | 37,497 |
| M95 | 6 | 91.1 | 0.14 | 135 | 97.4 | 116.20 | 0.1 | 640 | 75% | 675 | 4,234 | 59,858 | 44,116 |
| M100 | 6 | 96.1 | 0.14 | 145 | 103.4 | 124.20 | 0.12 | 640 | 75% | 675 | 4,721 | 70,542 | 51,990 |
| M105 | 6 | 101.1 | 0.14 | 150 | 108.4 | 129.20 | 0.12 | 640 | 75% | 675 | 5,235 | 81,642 | 60,170 |
| M110 | 6 | 106.1 | 0.14 | 155 | 113.4 | 134.20 | 0.12 | 640 | 75% | 675 | 5,775 | 93,845 | 69,164 |
| M115 | 6 | 111.1 | 0.14 | 165 | 118.4 | 141.70 | 0.12 | 640 | 75% | 675 | 6,342 | 107,996 | 79,593 |
| M120 | 6 | 116.1 | 0.14 | 170 | 123.4 | 146.70 | 0.12 | 640 | 75% | 675 | 6,935 | 122,635 | 90,382 |
| M125 | 6 | 121.1 | 0.14 | 173 | 128.4 | 150.70 | 0.12 | 640 | 75% | 675 | 7,554 | 138,159 | 101,823 |
| M130 | 6 | 126.1 | 0.14 | 178 | 133.4 | 155.70 | 0.12 | 640 | 75% | 480 | 8,200 | 155,344 | 114,488 |
| Bolt Size | Thread Pitch [mm] | Mean Diam. of Thread [mm] | Thread Friction µT | OD of Contact Area [mm] | ID of Contact Area [mm] | Mean Ø Contact Area | Washer Friction µW | Yield Point of Bolt [Mpa] | Ratio of Yield Point | Tension 65% Rel [Mpa] | Clamp load [kN] | Torque Total [Nm] | Torque Total FT/LBS |
|---|
| M45 | 4.5 | 42.1 | 0.15 | 70 | 46.2 | 58.10 | 0.1 | 1080 | 75% | 810 | 1,058 | 7,690 | 5,667 |
| M48 | 5 | 44.8
| 0.15 | 75 | 49.6 | 62.30 | 0.1 | 1080 | 75% | 810 | 1,193 | 9,296 | 6,851 |
| M52 | 5 | 48.8 | 0.15 | 80 | 53.6 | 66.80 | 0.1 | 1080 | 75% | 810 | 1,424 | 11,906 | 8,775 |
| M56 | 5.5 | 52.4 | 0.15 | 85 | 59.1 | 72.05 | 0.1 | 1080 | 75% | 810 | 1,644 | 14,836 | 10,934 |
| M60 | 5.5 | 56.4 | 0.15 | 90 | 63.1 | 76.55 | 0.1 | 1080 | 75% | 810 | 1,913 | 18,357 | 13,529 |
| M64 | 6 | 60.1 | 0.15 | 95 | 67.1 | 81.05 | 0.1 | 1080 | 75% | 810 | 2,168 | 22,148 | 16,323 |
| M68 | 6 | 64.1 | 0.15 | 100 | 71.1 | 85.55 | 0.1 | 1080 | 75% | 810 | 2,475 | 26,702 | 19,679 |
| M72 | 6 | 68.1 | 0.15
| 105 | 75.1 | 90.05 | 0.1 | 1080 | 75% | 810 | 2,802 | 31,839 | 23,466 |
| M76 | 6 | 72.1 | 0.15 | 110 | 79.1 | 94.55 | 0.1 | 1080 | 75% | 675 | 3,150 | 37,594 | 27,707 |
| M80 | 6 | 76.1 | 0.15
| 115 | 83.1 | 99.05 | 0.1 | 1080 | 75% | 810 | 3,519 | 44,001 | 32,429 |
| M85 | 6 | 81.1 | 0.15
| 120 | 88.1 | 104.05 | 0.1 | 1080 | 75% | 810 | 4,008 | 52,856 | 38,955 |
| M90 | 6 | 86.1 | 0.15 | 130 | 92.4 | 111.20 | 0.1 | 1080 | 75% | 810 | 4,529 | 63,307 | 46,657 |
| M95 | 6 | 91.1 | 0.15 | 135 | 97.4 | 116.20 | 0.1 | 1080 | 75% | 810 | 5,081 | 74,506 | 54,911 |
| M100 | 6 | 96.1 | 0.15 | 145 | 103.4 | 124.20 | 0.1 | 1080 | 75% | 810 | 5,666 | 87,798 | 64,707 |
| M105 | 6 | 101.1 | 0.15 | 150 | 108.4 | 129.20 | 0.1 | 1080 | 75% | 810 | 6,282 | 101,642 | 74,910 |
| M110 | 6 | 106.1 | 0.15 | 155 | 113.4 | 134.20 | 0.1 | 1080 | 75% | 810 | 6,930 | 116,864 | 86,129 |
| M115 | 6 | 111.1 | 0.15 | 165 | 118.4 | 141.70 | 0.1 | 1080 | 75% | 810 | 7,610 | 134,482 | 99,113 |
| M120 | 6 | 116.1 | 0.15 | 170 | 123.4 | 146.70 | 0.1 | 1080 | 75% | 810 | 8,322 | 152,747 | 112,574 |
| M125 | 6 | 121.1 | 0.15 | 173 | 128.4 | 150.70 | 0.1 | 1080 | 75% | 810 | 9,065 | 172,137 | 126,865 |
| M130 | 6 | 126.1 | 0.15 | 178 | 133.4 | 155.70 | 0.1 | 1080 | 75% | 810 | 9,841 | 193,585 | 142,672 |
Stainless Steel with A4-70 bolt lubricatied with MoS2
| Bolt Size | Thread Pitch [mm] | Mean Diam. of Thread [mm] | Load Area [mm2] | Thread Friction µT | OD of Contact Area [mm] | ID of Contact Area [mm] | Mean Ø Contact Area | Washer Friction µW | Yield Point of Bolt [Mpa] | Ratio of Yield Point | Tension 65% Rel [Mpa] | Clamp load [kN] | Torque Total [Nm] | Torque Total FT/LBS |
|---|
| M45 | 4.5 | 42.1 | 1306.06 | 0.14 | 70 | 46.2 | 58.10 | 0.15 | 450 | 65% | 292.5 | 382 | 3,239 | 2,387 |
| M48 | 5 | 44.8
| 1473.22 | 0.14 | 75 | 49.6 | 62.30 | 0.15 | 450 | 65% | 292.5 | 431 | 3,917 | 2,886 |
| M52 | 5 | 48.8 | 1757.9 | 0.14 | 80 | 53.6 | 66.80 | 0.15 | 450 | 65% | 292.5 | 514 | 5,013 | 3,695 |
| M56 | 5.5 | 52.4 | 2030.1 | 0.14 | 85 | 59.1 | 72.05 | 0.15 | 450 | 65% | 292.5 | 594 | 6,247 | 4,604 |
| M60 | 5.5 | 56.4 | 2362.1 | 0.14 | 90 | 63.1 | 76.55 | 0.15 | 450 | 65% | 292.5 | 691 | 6,247 | 5,694 |
| M64 | 6 | 60.1 | 2676.1 | 0.14 | 95 | 67.1 | 81.05 | 0.15 | 450 | 65% | 292.5 | 783 | 7,726 | 6,863 |
| M68 | 6 | 64.1 | 3055.4 | 0.14 | 100 | 71.1 | 85.55 | 0.15 | 450 | 65% | 292.5 | 894 | 11,223 | 8,271 |
| M72 | 6 | 68.1 | 3460 | 0.14 | 105 | 75.1 | 90.05 | 0.15 | 450 | 65% | 292.5 | 1,012 | 13,377 | 9,859 |
| M76 | 6 | 72.1 | 3889 | 0.14 | 110 | 79.1 | 94.55 | 0.15 | 450 | 65% | 292.5 | 1,138 | 15,791 | 11,638 |
| M80 | 6 | 76.1 | 4344 | 0.14
| 115 | 83.1 | 99.05 | 0.15 | 450 | 65% | 292.5 | 1,271 | 18,477 | 13,617
|
Stainless Steel with A4-80 bolt lubricated with MoS2
| Bolt Size | Thread Pitch [mm] | Mean Diam. of Thread [mm] | Load Area [mm2] | Thread Friction µT | OD of Contact Area [mm] | ID of Contact Area [mm] | Mean Ø Contact Area | Washer Friction µW | Yield Point of Bolt [Mpa] | Ratio of Yield Point | Tension 65% Rel [Mpa] | Clamp load [kN] | Torque Total [Nm] | Torque Total FT/LBS |
|---|
| M45 | 4.5 | 42.1 | 1306.06 | 0.14 | 70 | 46.2 | 58.10 | 0.15 | 450 | 65% | 390 | 509 | 4,318 | 3,183 |
| M48 | 5 | 44.8
| 1473.22 | 0.14 | 75 | 49.6 | 62.30 | 0.15 | 450 | 65% | 390 | 575 | 5,222 | 3,849 |
| M52 | 5 | 48.8 | 1757.9 | 0.14 | 80 | 53.6 | 66.80 | 0.15 | 450 | 65% | 390 | 686 | 6,684 | 4,926 |
| M56 | 5.5 | 52.4 | 2030.1 | 0.14 | 85 | 59.1 | 72.05 | 0.15 | 450 | 65% | 390 | 792 | 8,330 | 6,139 |
| M60 | 5.5 | 56.4 | 2362.1 | 0.14 | 90 | 63.1 | 76.55 | 0.15 | 450 | 65% | 390 | 921 | 10,301 7 | 7,592 |
| M64 | 6 | 60.1 | 2676.1 | 0.14 | 95 | 67.1 | 81.05 | 0.15 | 450 | 65% | 390 | 1,044 | 12,416 | 9,150 |
| M68 | 6 | 64.1 | 3055.4 | 0.14 | 100 | 71.1 | 85.55 | 0.15 | 450 | 65% | 390 | 1,192 | 14,964 | 11,028 |
| M72 | 6 | 68.1 | 3460 | 0.14 | 105 | 75.1 | 90.05 | 0.15 | 450 | 65% | 390 | 1,349 | 17,837 | 13,146 |
| M76 | 6 | 72.1 | 3889 | 0.14 | 110 | 79.1 | 94.55 | 0.15 | 450 | 65% | 390 | 1,517 | 21,054 | 15,517 |
| M80 | 6 | 76.1 | 4344 | 0.14
| 115 | 83.1 | 99.05 | 0.15 | 450 | 65% | 390 | 1,694 | 24,636 | 18,157
|
Scroll to top
